Bridges, walkways and viewpoints for pedestrians in natural areas
At Solutioma we design, calculate and build all kinds of pedestrian bridges, walkways and viewpoints outdoors. They are structures meant to blend into their surroundings, link points of interest and open up places no path reaches.
We have developed several models, but every job is made to measure and to each client's needs: from a timber walkway on a hiking trail to the longest pedestrian suspension bridge in Spain, the one at the Caminito del Rey, which we built in 2026.

Do you need to solve a pedestrian crossing in a natural area?
We visit the site and propose how to carry it out. You can also call us on +34 900 101 895.

What is the difference between a walkway and a suspension bridge?
A walkway or a timber viewpoint solves a crossing or an observation point by resting on the ground. It is a rustic-looking structure, in treated timber, intended for hiking trails, nature reserves, mountain areas and rural sites.
A pedestrian suspension bridge spans a longer gap: the deck hangs from cables anchored on both banks, with no intermediate supports. It is the answer when whatever lies below — a gorge, a watercourse — leaves nothing to rest on.
In both cases the design and the mix of materials follow what the ground needs: for the simplest structures we use timber alone and, in the more complex elements, we combine it with other materials such as stone, concrete or steel.
What do we do on each project?
We take care of the design, the structural calculation and the assembly on site. On the Caminito del Rey suspension bridge, our technical team also took on the recalculation of the structure to match the project to the real demands of the assembly, the geological survey of the rock mass, the foundations, the aerial assembly and the static and dynamic tests before opening. When access is the problem, we work with our rope access and hard-to-reach work teams; when the structure rests on a slope or a cliff, the foundations and anchors are studied together with the slope stabilisation.
Treated timber walkways and viewpoints
The walkways and viewpoints we build are usually made of planed Flanders pine treated in an autoclave to use class 4, which extends their service life. That class of treatment leaves the timber fit for outdoor use under permanent wetting and even protected for contact with the ground.
We have developed several models, but we work to order and to measure: for the simplest structures we use timber alone and, in the more complex elements, we combine it with other materials such as stone, concrete or steel. Either way, the design and the mix of materials follow what the ground needs.
They suit areas of environmental interest: hiking trails, nature reserves, mountain areas or rural sites in general.



Pedestrian suspension bridges
In 2026 we built, together with Agranaltura, the longest pedestrian suspension bridge in Spain, at the Caminito del Rey (Desfiladero de los Gaitanes, Málaga). The walkway sits on the final stretch of the route, parallel to the historic iron bridge carrying the regional railway line and to the El Chorro tunnel, in the municipality of Álora.
It is over 100 metres long and 50 metres high at its highest point, with a clear walking width of 1.2 metres. The walkway weighs roughly 17 tonnes and the new structure as a whole comes to some 38 tonnes.
We carried it out for the concession joint venture formed by Sando, Salzillo Servicios Integrales and Mundo Management, with the Provincial Council of Málaga as developer. More than 20 specialists worked on site. You can see how it was built in the project page.



Working where no vehicle can reach
Many of these crossings are where no lorry can get to. At the Gaitanes gorge there was no viable vehicle access, so we worked with aerial operations by helicopter to move materials and equipment and install the lifting masts, and with load and personnel cableways to bring the structural elements to their final position.
The various elements were placed by specialist rope access operatives. The ground shaped the foundations: joints in the rock called for boreholes up to 8 metres deep with cement grouting and, on the opposite slope, the solution was reinforced with micropiles and branched grouting because of a scree zone.
The work took place inside a protected natural area, which shaped the measures taken for the protection of flora and fauna.



Bridges, walkways and viewpoints we have built






YouTube channel
Videos of our projects
See how we work on site: slope scaling, dynamic rockfall barriers and rope access work filmed on our projects.
Frequently asked questions about bridges, walkways and viewpoints
Frequently asked questions about bridges, walkways and viewpoints
What timber are timber walkways and viewpoints built with?
The timber walkways and timber viewpoints we build are usually made of planed Flanders pine treated in an autoclave to use class 4, fit for outdoor use.
That class of treatment prepares the timber to stand permanent damp and even contact with the ground, which is the normal situation for a walkway on a hiking trail, in a nature reserve or by the sea. Autoclave treatment extends how long it lasts in the open.
Not all timber bridges are alike. For the simplest structures we use timber only; in the more complex elements we combine it with stone, concrete or steel. When the walkway rests on a slope or a cliff, the foundations and anchors are studied together with the slope stabilisation.
At Solutioma we design, calculate and build pedestrian bridges, walkways and viewpoints to suit the ground. If you are preparing a pedestrian access project in a natural area, we can look at it with you from the design stage.
Which is the longest pedestrian suspension bridge in Spain?
It is the Caminito del Rey walkway, in the Desfiladero de los Gaitanes (Málaga), which we built in 2026 together with Agranaltura. It is on the final stretch of the route, parallel to the historic iron bridge carrying the regional railway line and to the El Chorro tunnel, in the municipality of Álora.
It is over 100 metres long and 50 metres high at its highest point, with a clear walking width of 1.2 metres. The walkway weighs roughly 17 tonnes and the new structure as a whole comes to some 38 tonnes.
The work was carried out for the concession joint venture formed by Sando, Salzillo Servicios Integrales and Mundo Management, with the Provincial Council of Málaga as developer, and more than 20 specialists took part.
You can see how it was built in the project page.
How do you build a walkway where no lorry can reach?
With aerial means and rope access. At the Caminito del Rey there was no viable vehicle access: we used a helicopter to move materials and equipment and install the lifting masts, and load and personnel cableways to bring the structural elements into position.
The various elements were placed by specialist rope access operatives.
The ground decides the foundations. There, joints in the rock called for boreholes up to 8 metres deep with cement grouting and, on the opposite slope, the solution was reinforced with micropiles and branched grouting because of a scree zone.
As it is a protected natural area, the work was conditioned by the protection of flora and fauna.
What does Solutioma's work on a bridge or a walkway include?
We design, calculate and build. At the Caminito del Rey, our technical team also took on the recalculation of the structure to match the project to the real demands of assembly in a setting of that kind.
The stages of that job were the geological survey of the rock mass on both banks of the gorge, the foundations, the aerial assembly of the structure and the static and dynamic tests that verified its structural behaviour before opening.
On a timber walkway or viewpoint the scope is smaller, but the order is the same: the ground is surveyed, the design and the mix of materials are set, and it is assembled on site.
Tell us where the crossing you want to solve is and what it has to span, and we will propose how to carry it out.
How much does a timber walkway cost?
The price is worked out for each job. On timber walkways and viewpoints it depends on the length, the design, the mix of materials and the foundations.
Access weighs as much as the structure: if rope access, a mobile crane or a helicopter are needed, that counts too.
To prepare an assessment for you, send us the location, some photographs and a description of what you want to build. We work throughout Spain and in other countries, with offices in Lleida, Madrid, the Canary Islands, Jaén and Gipuzkoa; you can also call us on +34 900 101 895.
Contact
Do you want to build a bridge, a walkway or a viewpoint?
At Solutioma we design, calculate and build pedestrian bridges, walkways and viewpoints, with people who have more than 30 years' experience in the sector, rope access teams and our own machinery. If you would like to go over your questions with our technicians or ask for a quote, fill in the form below. If you prefer, you can also call us on +34 900 101 895; we will be glad to help.
- +34 900 101 895
Call us if you prefer - solutioma@solutioma.com
Write to us directly - Over 30 years of experience
Survey, design and execution with our own team and machinery - Offices in Spain and Romania
Lleida, Madrid, Canary Islands, Jaén, Gipuzkoa and Bucharest


